stores en bois à lamelles 65mm [500mm x 1000mm], Sur mesure, en ligne...

Stores En Bois à Lamelles 65mm

[Rx 270/65]

Dans notre collection de stores en bois de 65mm il y a les couleurs des plus populaires: blanc, blanc cassé et noir. Comme tous nos stores ceux-ci sont faits sur mesure pour donner à votre fenêtre une allure élégante. Nos stores basswood de 65mm sont conçus pour couvrir de très grandes fenêtres, mais ils puissent aussi bien se référer à petites fenêtres. Nos stores en bois de 65mm ressemblent à persiennes riches utilisées à l'époque coloniale, mais ils peuvent être acquises à une fraction de leur prix dans notre boutique en ligne des stores en bois.

Temps de productions approximatif pour stores en bois à lamelles 65mm: de 10 à 15 jours ouvrables. + Livré en 2-4 jours, voyez: Livraison

min/max dimensions pour stores en bois à lamelles 65mm sont:

largeur: minimum 270 mm -- maximum 2720 … 3630 mm
hauteur: minimum 400 mm -- maximum 4000 mm

Max SURFACE MANUAL = 6 métre carré

Hauteur approximative du colis:stores en bois à lamelles 65mm:

1000 mm hauteur donne 160 mm paquet de stores repliés pour stores en bois à lamelles 65mm quand est relevé concernant le rail- [Cela équivaut à 16 pourcentage de la hauteur de store.]

Installer vos stores vous-mêmes, est plus facile que vous le pensez! Même si vous n’avez pas l’habitude de tenir des outils, vous saurez certainement poser vos stores sans difficultés. Toutes les équerres et supports sont joints à l’envoi avec les instructions de pose.
Nous sommes sûrs que c’est à votre portée. Si vous faites aider par un ami ou même un spécialiste, cela vous reviendra moins cher que des stores sur mesure acquis dans un magasin traditionnel

65mm Faux-Wood Blinds CEDRO with Side Guiding - download instruction in adobe acrobat file
PDF

65mm Faux-Wood Blinds CEDRO - download instruction in adobe acrobat file

fixation mural 12mm, fixation mural 19mm

fixation plafond, special fixation plafond

Fixations Sans Perçage
fixation mural 12mm, fixation mural 19mm

Couleur de Ruban:
Hauteur approximative du colis -		- hauteur de store
Ouverture -

	C = mm

		B = mm

Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you'll do alright.
Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.

INSIDE MOUNT

BLINDS WIDTH
Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements.
BLIND DROP
Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement.
*** it does not apply to vertical blinds - see top of product page.

IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS!
Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.

*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.

OUTSIDE MOUNT

BLINDS WIDTH
Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement.
BLIND DROP
Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.

IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES.

IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.

Imprimez le tableau pour y relever les dimensions de vos stores-> montre le tableau

Stores En Bois à Lamelles 65mm

Couleur

Aperçu des couleurs

Couleur de Ruban

utilisez cordon d'échelle

Couleur de Ruban 38 mm

Couleur de Ruban 25 mm

Extra Tape (optional)

Type d'Orientation

Orientation & Tirage

Câbles de Guidage (optionel)

Bottom Rail Fixing

Type de Cantonnière

Équerres de Fixation

Fixations Sans Perçage

Vis de Fixation

Embout Visseuse

Plinthe

Sécurité Enfant