mm
cm
m

Trepersienner 65mm

[Rx 270/65]

I vår samling av trepersienner  65mm er de mest populære fargene: hvit, off-hvit og svart. Som alle våre persienner er de produsert  etter mål å gir vinduene et ryddig utseende.
Våre basswood persienner 65mm de er utformet for å dekke store vinduer,
selv om de passer og ser bra ut også i mellomstore vinduer. Trepersienner 65mm minner rik skodder fra kolonitiden, men de kan bli kjøpt for en brøkdel av prisen i vår butikk med tre persienner.

mm
cm
m
500 x 1000 mm
767.17 NOK 1,180.30 NOK -35% pris inkludert moms
(-35%);SALG!

Forhåndsvisning av farger
Eksempelvindu
(1000 x 1300mm)

Loading...
Preview Tape Configuration

Konfigurasjonstrinn


Farge

Fargene sett på skjermen kan avvike fra faktiske fargene av persienner. Først bestill prøver, hvis den nøyaktige fargen på persienne er viktig for deg.

basswood white
basswood pearl white
basswood off-white
basswood shell
basswood sand
basswood limestone
basswood cloud
basswood taupe
basswood antracite
basswood black

basswood natural
basswood maple
basswood light oak
basswood cherry ** LIMITED SUPPLY
basswood walnut
basswood wenge
Preview full-sized images
Preview full-sized images
Forhåndsvisning av farger
Eksempelvindu (1000 x 1300mm)
Loading...

Sammendrag

Trepersienner 65mm

Loading...

Referanse


Omtrentlig vekt: 1.7 kg

Omtrentlig høyde på hevet:
160 mm (16%)

Omtrentlig produksjonstiden: 5 - 5 virkedager + Levering

Omtrentlig produksjonstiden trepersienner 65mm: ca. 5-5 virkedager. + sending in 2-4 virkedager, se: Levering

Min./Maks. dimensjoner for trepersienner 65mm er:

bredde: min. 270 mm -- maks. 2720 … 3630 mm
høyde: min. 400 mm -- maks. 4000 mm

Maksimalna areal for en standard kontroll = 6 kvm

omtrentlig høyde på hevet lamellen trepersienner 65mm:

1000 mm persiennev høye betyr 160 mm høyde på hevet lamellen trepersienner 65mm, inkludert øvre renne - [dette er 16 % av hele persienner]

Istaller selv dine persienner - det er enklere enn du tror! Selv om du aldri har hatt verktøy i hånden, vil du håndtere den med riktig installasjon av persienner.
Alle monteringsbraketter er inkludert i pakken. I tillegg, hver bestilling vi inkluderer installasjonsmanualen persienner.

PDF 65mm Faux-Wood Blinds CEDRO with Side Guiding - download instruction in adobe acrobat file
PDF 65mm Faux-Wood Blinds CEDRO - download instruction in adobe acrobat file




klamme til å hake på veggen 12mm, klamme til å hake på veggen 19mm
Dimensions
Dimensions

takhake, tak klamme, spesiell takhake
Dimensions
Dimensions

Vindusramme Braketter
klamme til å hake på veggen 12mm, klamme til å hake på veggen 19mm
Dimensions
Dimensions

Farge bånd:
Omtrentlig høyde på hevet - - høyden på persienner
CLEARANCE -
C = mm    

B = mm    

Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you'll do alright.
Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.


INSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements.
BLIND DROP 
Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement.
*** it does not apply to vertical blinds - see top of product page.

IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS!
Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.

*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.

OUTSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement.
BLIND DROP
Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.

IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES.
IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.
Skriv ut tabellen for å skrive ned de eksakte mål pa persienner -> vis tabell

klamme til å hake på veggen 12mm, klamme til å hake på veggen 19mm
Dimensions
Dimensions

takhake, tak klamme, spesiell takhake
Dimensions
Dimensions

Vindusramme Braketter
klamme til å hake på veggen 12mm, klamme til å hake på veggen 19mm
Dimensions
Dimensions

Lignende produkter