mm
cm
m

Tende A Rullo Oscuranti

[bl/32]

La nostra collezione di tende oscuranti è una soluzione perfetta per le finestre esposte a sud, per le stanze da computer e le camere da letto. Il tessuto sul lato esterno è bianco, crema o abbinato con il colore del tessuto. Si prega di controllare in opzione colori disponibili.
Le nostre tende oscuranti vengono fissate con supporti standard per facilitare l’installazione della tenda a rullo sia dentro che fuori la nicchia della finestra.

INFORMAZIONE IMPORTANTE:
La larghezza che devi indicare è la larghezza totale della tenda a rullo inclusi i supporti per il fissaggio e il meccanismo di comando. La larghezza del tessuto della tenda sarà inferiore di circa 35mm rispetto alla larghezza totale della tenda.

mm
cm
m
€ 37.79 € 47.23 -20% prezzo con l’IVA
(-20%);SVENDITE!

Passaggi di configurazione


Colore

I colori che vedi sullo schermo possono differire da quelli reali. Se il colore esatto della tenda è per te importante, oridna prima i Campioni.

B600_BO
B601_BO
+25%
Z045_BO_PT (W042) ****discontinued
+60%
Z048_BO_PT_ST (W045) ****discontinued
+100%
Z047_BO_PT_ST (W044) ****discontinued
+25%
Z046_BO_ST (W043)
B651_BO_DO
B602_BO
B650_BO_DO
B652_BO_DO
+60%
Z004_BO_PT (C078) ****discontinued
+100%
Z002_BO_PT (C043) ****discontinued
+25%
Z003_BO_PT (C053) ****discontinued
B603_BO
B604_BO
B605_BO
+25%
Z042_BO_DO
B606_BO
B607_BO ****discontinued
Z082_BO
B624_BO ****discontinued
+100%
Z014_BO_DO
B653_BO_DO
+100%
Z060_BO_DO
+25%
Z072_BO
B625_BO
+25%
Z073_BO_DO
B654_BO_DO
+60%
Z062_BO
Z078_BO_DO
B619_BO
B621_BO
B658_BO_DO
B620_BO
+60%
Z007_BO_PT (G024) ****discontinued
+60%
Z044_BO_PT (V019) ****discontinued
B669_BO_DO
+60%
Z071_BO_PT_DO
B627_BO
+100%
Z069_BO
B670_BO_DO
B628_BO
B668_BO_DO
B622_BO
B657_BO_DO
B623_BO
B656_BO_DO
B655_BO_DO
B659_BO_DO
B615_BO ****discontinued
B618_BO
+100%
Z066_BO_DO
B617_BO
B660_BO_DO
B616_BO
B661_BO_DO
+60%
Z006_BO_PT (G013) ****discontinued
B611_BO
B612_BO
+25%
Z055_BO
+100%
Z065_BO
+60%
Z070_BO_PT_DO
+60%
Z005_BO_PT (G003) ****discontinued
B613_BO
B663_BO_DO
B614_BO
B662_BO_DO
B664_BO_DO
B610_BO
+25%
Z050_BO
+100%
Z061_BO_DO
+25%
Z041_BO_DO
B626_BO
+25%
Z056_BO
+100%
Z049_BO_PT (W095) ****discontinued
+100%
Z028_BO_DO
+100%
Z030_BO_DO
+25%
Z031_BO_DO
B667_BO_DO
B609_BO
+25%
B639_BO
B677_BO_DO
B665_BO_DO
+25%
B640_BO
B682_BO_DO
+25%
Z074_BO_DO
B666_BO_DO
B608_BO
Full-sized anteprima dei campioni.
Full-sized anteprima dei campioni.

Sommario

Tende A Rullo Oscuranti

Riferimento


Peso Approssimativo: 0.54 kg

Approssimativa Dimensione del Pacchetto:
60 mm (12%)

Approssimativo di produzione in tempo: 9 - 12 giorni lavorativi + Spedizione

Approssimativo di produzione in tempo per tende a rullo oscuranti: in 9 - 12 giorni lavorativi. + Consegna in 2-4 giorni, guarda: Spedizione

Misure minime/massime per tende a rullo oscuranti sono:

larghezza: minime 300 mm -- massime 1900 … 3500 mm
altezza: minime 300 mm -- massime 1750 … 4000 mm

Max SURFACE MANUAL = 6 metri quadri

approssimativa dimensione del pacchetto per tende a rullo oscuranti:

1000 mm di altezza della tenda significa 60 mm di dimensione del pacchetto per tende a rullo oscuranti - [ il ché costituisce il 6 % dell’altezza della tenda intera. ]

Installa le tue tende da solo: è piu facile di quanto sembri! Anche se non hai mai lavorato con attrezzi, riuscirai senza problemi a montare le tende correttamente. Il pacco contiene tutti i supporti per il fissaggio. Inoltre, a ogni tenda ordinata viene allegata l’istruzione per il montaggio.

PDF Roller Blinds - download instruction in adobe acrobat file




mm
Approssimativa Dimensione del Pacchetto - - altezza della tenda
CLEARANCE -
C = mm    

B = mm    



Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you’ll do alright.
Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.


INSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements.
BLIND DROP 
Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement.
*** it does not apply to vertical blinds - see top of product page.

IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS!
Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.

*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.

OUTSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement.
BLIND DROP
Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.

IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES.
IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.
Print customized table to write the measurements for your blinds-> Monstra Tabella