mm
cm
m

Tende Day&Night IMPRESSIONE

[ft/32]

La tenda a rullo Day&Night IMPRESSIONE è disponibile in dieci colori universali per soddisfare tutte le tue esigenze decorative. Il tessuto è composto di strisce trasparenti e opache per lasciar entrare la desiderata quantità della luce solare. Il rullo avvolgitenda è nascosto in un cofanetto elegante mentre la barra inferiore (contro-peso)  è dello stesso colore del cofanetto: bianca o grigia. Il meccanismo del comando a catenella è situato dalla parte destra o da quella sinistra. A piè di pagina trovate altri dettagli tecnici riguardanti la tenda Day&Night nonché tutte le istruzioni per il montaggio.

mm
cm
m
€ 78.78 € 98.47 -20% prezzo con l’IVA
€ 98.47 (-20%)€ 78.78 ;SVENDITE!

Passaggi di configurazione


Colore

I colori che vedi sullo schermo possono differire da quelli reali. Se il colore esatto della tenda è per te importante, oridna prima i Campioni.

D112_73m (FA_01)
D117_128m (FW_01)
D110_73m (FA_02)
D104_73m (FA_03)
D108_73m (FA_05)
D101_73m (FA_06)
D106_73m (FA_14)
D105_73m (FA_13)
D109_73m (FA_07)
D114_73m
D107_73m (FA_08)
D120_73m (ZZ_08)
D111_73m (FA_12)
D118_128m (FW_12)
D121_73m (ZZ_09)
D115_73m
D102_73m (FA_17)
D116_128m (FW_17)
D113_73m
D103_73m (FA_15)
ZZ_01_73m **discontinued
FW_02_128m **discontinued
ZZ_02_73m **discontinued
ZZ_03_73m **discontinued
ZZ_04_73m **discontinued
ZZ_06_73m **discontinued
FA_04_73m (D_I007) **discontinued
FA_10_73m (D_I009) **discontinued
FA_11_73m (D_I008) **discontinued
ZZ_05_73m **discontinued
ZZ_07_73m **discontinued
FA_09_73m (D_I002) **discontinued
ZZ_10_73m **discontinued
FW_16_128m **discontinued
Full-sized anteprima dei campioni.
Full-sized anteprima dei campioni.

Sommario

Tende Day&Night IMPRESSIONE

Riferimento


Peso Approssimativo: 1.05 kg

Approssimativa Dimensione del Pacchetto:
70 mm (14%)

Approssimativo di produzione in tempo: 9 - 12 giorni lavorativi + Spedizione

Approssimativo di produzione in tempo per tende Day&Night IMPRESSIONE: in 9 - 12 giorni lavorativi. + Consegna in 2-4 giorni, guarda: Spedizione

Misure minime/massime per tende Day&Night IMPRESSIONE sono:

larghezza: minime 300 mm -- massime 2300 mm
altezza: minime 300 mm -- massime 1900 … 2500 mm

Max SURFACE MANUAL = 6 metri quadri

approssimativa dimensione del pacchetto per tende Day&Night IMPRESSIONE:

1000 mm di altezza della tenda significa 70 mm di dimensione del pacchetto per tende Day&Night IMPRESSIONE - [ il ché costituisce il 7 % dell’altezza della tenda intera. ]

Installa le tue tende da solo: è piu facile di quanto sembri! Anche se non hai mai lavorato con attrezzi, riuscirai senza problemi a montare le tende correttamente. Il pacco contiene tutti i supporti per il fissaggio. Inoltre, a ogni tenda ordinata viene allegata l’istruzione per il montaggio.

PDF Duo Roller Blinds - download instruction in adobe acrobat file



Dimensions


mm

Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you’ll do alright.
Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.


INSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements.
BLIND DROP 
Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement.
*** it does not apply to vertical blinds - see top of product page.

IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS!
Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.

*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.

OUTSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement.
BLIND DROP
Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.

IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES.
IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.
Print customized table to write the measurements for your blinds-> Monstra Tabella
Dimensions