mm
cm
m

Tende A Rullo COMFORT

[rbAB/32]

Le nostre tende a rullo in tessuto COMFORT vengono realizzate in tessuti in tinta unita, tessuti fantasia o goffrati, provenienti dalle fabbriche che garantiscono alta qualità. Tutte le tende a rullo sono fornite di meccanismo di comando laterale a catenella che permette di controllare facilmente l’ingresso della luce solare. 
La collezione COMFORT non garantisce tuttavia l’effetto dell’oscuramento totale e non blocca completamente la luce solare – per ottenere questo effetto bisogna scegliere le tende a rullo oscuranti.  Il rullo avvolgitenda è abbastanza resistente per ogni larghezza e lunghezza e la barra inferiore della tenda è completamente nascosta sotto il tessuto della tenda.
INFORMAZIONE IMPORTANTE:
La larghezza che devi indicare è la larghezza totale della tenda a rullo inclusi i supporti per il fissaggio e il meccanismo di comando. La larghezza del tessuto della tenda sarà inferiore di circa 35mm rispetto alla larghezza totale della tenda.

mm
cm
m
€ 36.34 € 45.42 -20% prezzo con l’IVA
€ 45.42 (-20%)€ 36.34 ;SVENDITE!

Passaggi di configurazione


Colore

I colori che vedi sullo schermo possono differire da quelli reali. Se il colore esatto della tenda è per te importante, oridna prima i Campioni.

A301
A300
T120_PT (W034)
T121_PT (W036) DISCONTINUED
T122_PT (W035) **discontinued
T134_PT (W037) **discontinued
T133_PT (W024) **discontinued
T047_ST (W028)
A302
A303
T058_ST (C011)
A305
A304
A369
A372
T057_PT_ST (C007) **discontinued
A603_TR
A307
A306
A308
A309
A338
A340
A339
A333
A335
A334
A336
A337
A317
A316
A350
T073_PT (V020) **discontinued
A351
A353
A352
A344
T032_ST (Y011)
A345
A343
A342
A341
A347
A348
A346
A349
A327
T070_PT (G025) **discontinued
A331
A330
A328
A329
A326 **discontinued
A332
A311
A312
A313
A315
A314
A310
A322 **discontinued
T023_PT_ST (W062) **discontinued
A319
T022_ST (W067)
A318
T024_ST (W072)
A320
A602_TR
A604_TR **discontinued
A605_TR
T229_TR
A321
Full-sized anteprima dei campioni.
Full-sized anteprima dei campioni.

Sommario

Tende A Rullo COMFORT

Riferimento


Peso Approssimativo: 0.54 kg

Approssimativa Dimensione del Pacchetto:
60 mm (12%)

Approssimativo di produzione in tempo: 9 - 12 giorni lavorativi + Spedizione

Approssimativo di produzione in tempo per tende a rullo COMFORT: in 9 - 12 giorni lavorativi. + Consegna in 2-4 giorni, guarda: Spedizione

Misure minime/massime per tende a rullo COMFORT sono:

larghezza: minime 300 mm -- massime 1900 … 3500 mm
altezza: minime 300 mm -- massime 1750 … 4000 mm

Max SURFACE MANUAL = 5.7 metri quadri

approssimativa dimensione del pacchetto per tende a rullo COMFORT:

1000 mm di altezza della tenda significa 60 mm di dimensione del pacchetto per tende a rullo COMFORT - [ il ché costituisce il 6 % dell’altezza della tenda intera. ]

Installa le tue tende da solo: è piu facile di quanto sembri! Anche se non hai mai lavorato con attrezzi, riuscirai senza problemi a montare le tende correttamente. Il pacco contiene tutti i supporti per il fissaggio. Inoltre, a ogni tenda ordinata viene allegata l’istruzione per il montaggio.

PDF Roller Blinds - download instruction in adobe acrobat file




mm
Approssimativa Dimensione del Pacchetto - - altezza della tenda
CLEARANCE -
C = mm    

B = mm    



Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you’ll do alright.
Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.


INSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements.
BLIND DROP 
Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement.
*** it does not apply to vertical blinds - see top of product page.

IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS!
Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.

*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.

OUTSIDE MOUNT


BLINDS WIDTH
Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement.
BLIND DROP
Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.

IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES.
IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.
Print customized table to write the measurements for your blinds-> Monstra Tabella