Note: The selected screws are only a recommendation that fits into the generally defined type of substrate, the evaluation of which is the responsibility of the customer. We are not responsible for the durability of the surface, the quality of the screws and the method of fixing by the customer. Damage resulting from incorrect assembly, poor ground assessment or screw defects are not subject to complaint.
- none -
wood screws +€ 1.82
brick, concrete fisher dowel and screw +€ 1.82
brick, concrete long dowel and screw +€ 2.35
plasterboard dowel and screw +€ 1.82
Note: There is already one or more Screwdriver BITs in your cart.
- none -
yes +€ 0.65
yes +€ 18.92
Young children have been strangled by loops in pull-cords, chains and tapes, and cords that operate the product,
To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck,
Move beds, cots and furniture away from window covering cords,
Do not tie cords together. Make sure cords do not twist and create a loop,
To reduce the risk of accidents please use the safety device provided.
WARNING: Please note that you may not be able to reach the control cords.
In order to change the lenght of cords please contact us or indicate it in order comment box.
blind drop 1000 mm
Attention: According to EU norm EN13120 the strings or chains in this product may cause a potential strangulation hazard. By clicking the button below, you confirm that the ordered blinds do not require safety measures for children and that the product will be installed in a window / room that is not accessible to children.
By confirming you liberate us from our responsibility and any possible claims referring to the above.
Approximate Cord Length: 700 mm
Fitting Height from the floor
Faux Wood Blinds 35mm
Approximate Weight: 2.15 kg
Approximate Size of Stack:
163 mm (16.3%)
⇒ 177 mm (17.7%)
Approximate Production Time: 5 - 5 working days + Shipping
With this color laddertape slat staining may occur. All complains regarding slat staining will be dealt with at the expense of buyer.
Approximate production time for faux wood blinds 35mm: from 5 to 5 working days. + Shipped in 2-4 days, see: Shipping
min/max dimensions for faux wood blinds 35mm are:
width: minimum 270 mm -- maximum 2720 mm drop: minimum 400 mm -- maximum 4000 mm
Max SURFACE MANUAL = 4 sq meters
approximate size of stack for faux wood blinds 35mm:
1000 mm drop will produce 163 mm stack for faux wood blinds 35mm when raised including the headrail - [ this equals 16.3 % of the blind's drop. ]
Installing your blinds yourself is as easy as anything else. Even if you have never had a tool in your hand you will be able to mount your blinds in place correctly. All mounting brackets are included. We will enclose installation tips with your order.
We are positive you will do alright with the fitting job -- but even if you decide to ask help from a friend or a specialized company -- we are sure it will eventually cost you much less than buying from a traditional blinds company.
Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you'll do alright. Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.
BLINDS WIDTH Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements. BLIND DROP Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement. *** it does not apply to vertical blinds - see top of product page.
IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS! Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.
*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.
BLINDS WIDTH Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement. BLIND DROP Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.
IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES. IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.
Print customized table to write the measurements for your blinds show table